MasterChem IE80 is a ready-to-use product. Apply to the surface with a damp cloth or spray.
Surface disinfection by wiping: moisten a cloth with MasterChem IE80 and wipe the surface with it. Spray disinfection of surfaces: spray MasterChem IE80 onto the surface from a distance of up to 30 cm. If the alcohol resistance of the coating is unknown, it can be tested on an inconspicuous spot on the surface. The product is suitable for coating on the following coating materials: metals – stainless steel, aluminum, copper and brass; floor coverings – PVC, linoleum and ceramic tiles and plastic, glass surfaces. If necessary, after the holding time, the surfaces can be wiped with a dry cloth. Use biocide safely! Be sure to read the attached information before use!
Lasts 30 seconds.
Certificate of registration of biocidal product No 2040/20
H225 – Highly flammable liquid and vapor
H319 – Causes serious eye irritation. P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Do not smoke.
P233 Keep container tightly closed.
P403 + P235 Store in a well-ventilated place. Keep cool.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Rinse again.
P501 Dispose of contents / container to hazardous or special waste collection point.
500 ml plastic sprey bottle
5000 ml plastic can
25 lit plastic can
200 lit drum/barrel
500 lit IBC container
1000 lit IBC container
24 mt bulk
Store the product at a temperature between 0 °C and 35 °C and do not expose it to direct sunlight.
Composition: 100 g of product contains: Ethanol 66.5 g (active ingredient), Isopropanol 7g (active ingredient)
Density: at 20 degrees C – 0.85 g/cm3 +-0.01
Color – colorless liquid